En-light-ening ATEX Part 3 – Control Ignition Sources and Lighting Tristan Pulford|03.11.21 In the final part of our ATEX series, Tristan Pulford discusses control ignition sources and lighting.
En-light-ening ATEX Part 2 – Hierarchy of Control Tristan Pulford|20.10.21 In the next part of the ATEX series, Tristan Pulford elaborates on the hierarchy of controls and hazardous area classification.
En-Light-ening ATEX – Part 1 Tristan Pulford|18.10.21 In this upcoming series of articles, Tristan Pulford discusses ATEX, the hierarchy of controls and what you need to be aware of. This first part takes a look at ATEX, what it is, and how to know if it applies to you and your company.
How safe are my machines? Part 2 Paul Wood|10.02.23 Asset Management Expert Paul Wood delves into safety in relation to plant & equipment and how maintaining compliance with the applicable regulations, will form a strong foundation upon which to achieve the zero-harm. The first part looks at the regulations applied during Pre-operation which you can catch up on here. This second part will consider the regulations applicable during operation.
Shouting about safety whilst whispering about health Morag McWilliam|03.10.22 In this article, Morag McWilliam discusses how occupational health hazards don’t always get the attention they should and the type of environments where risks can strike.
If it ain’t broke, don’t fix it – reviewing risk assessments Multiple authors|25.05.22 In this video, Health and Safety Solicitor Sue Dearden and Senior Consultant Angelica Rutherford-Hacon discuss the common pitfalls of reviewing risk assessments, how the hierarchy of controls informs decisions and how duty holders should look at risks.
Finch to present on The Brewing Engineering Association Webinar Multiple authors|26.07.21 Howard Wheeler and Tristan Pulford are to give a presentation on Changes to UK engineering standards following Brexit (including UKCA and ATEX) as part of the Brewing Engineering Association webinar, Brewery Engineering Changes and Challenges.
Why flour must be considered under the DSEAR Tristan Pulford|22.06.21 In this article, Principal Consultant Tristan Pulford takes a look at the Dangerous Substances and Explosive Atmosphere Regulations (DSEAR), and why flour must be considered under the regs.
Finch consultant to speak at 60th Hazards 30 process safety conference Andrew Millington|09.03.20 Finch consultant, Matt Longley has been invited to speak at the event to provide an oral presentation of a paper he wrote about protecting the mental health of employees, specifically related to the findings of a survey the film & TV industry recently carried out and how the findings can be related to other industries.
